ALKOSIGN STANDS FOR BOARDS

 

ALKOSIGN FOUR LEGGED STEEL STAND

4 Legged Stand Small.jpg (12866 bytes)

Four Legged Steel Easels are Sturdy in Design. Boards rests on clamps with non skid rubber. They are suitable for any board of size upto 1200mm x 1800mm.

  • ART NO. AW BS/4L

 

ALKOSIGN THREE LEGGED STEEL STANDS

Three_legged_Stand.jpg (5999 bytes)

Three Legged Steel Easels are Sturdy in Design. Boards rests on clamps with non skid rubber. Extra holes are provided for adjusting height.

  • ART NO. AW BS/3L 6090 - 1500mm. Stand Height for boards upto 600mm x 900mm.

  • ART NO. AW BS/3L 90120 -1800mm. Stand Height for boards upto 900mm x 1200mm.

  • Boards are to be separately ordered.

 

ALKOSIGN PEDESTAL STAND - WITHOUT CASTORS

Alkosign Pedestal Stand 2 Without Castor SMALL.jpg (5089 bytes)

Pedestal Stand Consists of a heavy threaded base, an Anodised Aluminium pipe of  1800mm length and two nylon holders to be fixed on the boards. Available with or without Castors.

 

Use 2 Pedestal stands for 900mm x 1200mm boards.

See Assembly of Pedestal Stand

  • ART NO: APS  without Castors

 

ALKOSIGN PEDESTAL STAND - WITH CASTORS

Pedestal Stand With Castors Small.jpg (6038 bytes)

Pedestal Stand Consists of a heavy threaded base with Castors, an Anodised Aluminium pipe of  1800mm length and two nylon holders to be fixed on the boards..

  • ART NO: APSC with Castors

 

ALKOSIGN LOBBY BOARD WITH STAND

Lobby Board Stand Small.jpg (4200 bytes)

Lobby Board With Stand is a light weight portable unit convenient for direction in lobbies etc.

Stand accommodates board size of 300mm. x  450mm.

  • ART NO: ALB

 

ALKOSIGN RECEPTION BOARD STAND

Reception Board Stand Small.jpg (3673 bytes)

Alkosign Reception Board Stand has four legs support base with leveling screws and the board is set at an angle to make it easily readable. It is ideal to use in Foyers and Reception area to provide information.

It can be used with any dry wipe or perforated boards of size 600mm x 900mm

  • ART NO: ARBS (Stand Only) Board to be ordered seperately.

 

ALKOSIGN REVOLVING BOARD STANDS

Revolving Board Stand (Small).jpg (4928 bytes)

Alkosign Revolving Board Stand is provided with heavy duty lockable castors. Revolving Double Sided Boards can be locked in either position with positive locking system. The stands are packed in CKD condition and can be assembled easily.

  • ART NO: AWBS/R 9060 for boards 900mm width x 600mm height.
  • ART NO: AWBS/R 12090 for boards 1200mm width x 900mm height.
  • ART NO: AWBS/R 180120 for boards 1800mm width x 1200mm height.
  • Order Double Sided Boards Seperately.

Top

Other Alkosign Products

Writing Boards - Astra Series | Writing Board Accessories | Display Boards

 Accessories-Display Boards | Felt/Cork Notice Boards | Combination Boards

  Grooved Boards | Flip Chart Boards | Stands For Boards | Exhibition Display Systems  

  Desk Plates/Counter Board / Paging Board / Memo Board | Acrylic Name Plates | Acrylic Products

Eco Series Boards | Cover Notice Boards & Key Boards